I am using DVI from the monitors. So 2 of them have adapters to HDMI.
Here's a little diagram if that helps. M = Monitor, A = Adapter.
|M1|...|M2|...|M3|
DVI......DVI.....DVI
^..........^.........^
^..........^.........^
^..........^.........^
^..........^.........^
^..........^.........^
^..........A.........A
DVI....HDMI...HDMI
Then from here, connected to the back of the tower.
My problem is that it when I go into display settings to activate the 3rd monitor, it disables the 2nd, and vice versa. So it will only allow 2 displays but shows all 3, the 3rd one remains disabled.
Do I just need a new graphics driver that supports 3 displays?